Black Steel Correction Bit
Black Steel Correction Bit with copper wire wrapped mouth, wide high port and 8" cheeks.

#11052
 
Black Steel Correction Bit
Black Steel Correction Bit with copper wire wrapped mouth, high port and 6" cheeks.

#11051
 
Black Steel Curb Bit
Black Steel Curb Bit with 5" low port sweet iron mouth piece and 7-3/4" cheeks.

#11053
 
Black Steel Grazing Bit
Black Steel Grazing Bit has a 5" mouth with medium port and 6-1/2" cheeks.


#766
 each
Black Steel Training Bit
Black Steel Training Bit with 5" correction mouth with copper ring rollers and 8" cheeks.

#767
 each
Chain Bit
Stainless steel Chain Bit with 7" cheeks, 5" black steel chain mouth with copper center link, and rope with chain curb strap.

#968
 each
Concho Show Snaffle Bit
Brown steel Concho Show Snaffle Bit with silver trim, 8-1/2" cheeks and jointed mouth.

#1063
 each
Copper Mouth Correction Bit
Stainless steel Copper Mouth Correction Bit is considered one of the most severe mouth pieces available. Applies tongue pressure at both flexible joints of the port as well as on the bars of the horses mouth. 5" copper high port mouth, 6-1/2" cheeks.

#10460
 
Copper Mouth Curb Bit
Stainless steel Copper Mouth Curb Bit is considered a leverage bit because of the action of the curb chain. 5" copper mouth, 7" cheeks.

#10468
 
Copper Mouth Tom Thumb Snaffle Bit
Get excellent results with this stainless steel Copper Mouth Tom Thumb Snaffle Bit. Has a 5" jointed copper mouth and 6" cheeks.

#10454
 
Copper Mouth Training Snaffle Bit
Stainless steel Copper Mouth Training Snaffle Bit is a basic schooling/training bit with 5" jointed copper mouth and 7" cheeks.

#10455
 
Copper Rollermouth Snaffle Bit
Stainless steel Copper Rollermouth Snaffle Bit with 5" copper rollermouth and 6-1/2" cheeks.

#10459
 
Correction Bit
Stainless steel Correction Bit with a combination of stainless steel and doubled copper covered rollers on 5" port mouth and brown steel curved 8-1/2" cheeks.

#10586
 each
Correction Bit
Stainless steel Correction Bit with copper high port and 9 1/2" cheeks.

#11049
 
Curb Bit
Mallable iron and nickel plated Curb Bit has a 4-3/4" mouth and 7-1/2" cheeks.

#770
 4-3/4" mouth
#817 5" mouth
Gun Bit
Stainless steel Gun bit with 9-1/2" "gun" cheeks, 5" high port mouth and chain.

#806
 each
Icelandic Gag Bit
Stainless steel Icelandic Gag Bit with 180mm cheek length. Mouth thickness is 13mm in size 4-1/8".

#11146
 
Jaw Breaker Bit
Stainless steel Jaw Breaker Bit has 6" cheeks and a 5" jointed sweet iron mouth.

#991
 each
Jointed Curb Bit
Stainless steel Curb Bit has a 5" jointed copper mouth and 7-1/2" cheeks.

#1325
 each
Lifter Correction Mouth Bit
Stainless Steel Lifter Correction Mouth Bit has a 5" mouth and 8" cheeks. This western style bit is designed to help distribute pressure more evenly.

#1238
 each
Lifter Ported Bit
Stainless Steel Lifter Ported Bit is designed to help distribute pressure more evenly. Features a dotted silver inlay with a 5" mouth and 8" cheeks.

#1239
 each
Lifter Sweet Mouth Bit
Lifter Sweet Mouth Bit has a Stainless Steel frame with a 5" sweet iron mouth and 8-1/2" cheeks.

#1237
 each
Low Port Combination Bit

Low Port Combination Bit has a 5" mouth piece with copper roller.

#1336
 each
Luebben Training Bit
Well made 8-1/2" Luebben Training Bit with aluminum cheeks and 5" black steel mouth. Increases the horses awareness and provides excellent contact between the riders hand and the horses mouth.

#10496
 
Ported Curb Bit
Stainless steel Ported Curb Bit has a 4-3/4" copper ported mouth and 7" cheeks.

#1326
 each
Ported Show Bit
Black steel and German Silver Ported Show Bit with 9" cheeks with silver overlay and 5" swivel ported mouth.

#997
 each
Precision Bit
Precision Bit instructs by gentle pressure not by pain or pain avoidance. This engraved design stainless steel precision bit provides the control expected of a ported bit while also allowing independent control of both left and right sides of the horses mouth. The internal spring feature allows either side of the mouthpiece to rotate independently and smoothly and permits the smooth return of the port to its resting position. Pinchless 5" mouthpiece.

#269770
 each
Rutledge Bit
Rutledge Bit with 5" mouth and stainless steel shanks can make even the most nervous of horses settle down because there is no pressure on the bars.

#10537
 
Show Bit
Show Bit with German Silver trim and slobber bar, has 8-1/4" cheeks and a 5" stainless steel mouth.

#765
 each
Show Bit
Brown steel Show Bit has 8" cheeks with brass dots and silver star overlay. Stainless steel with copper inlaid high port pivoting mouth.

#1012
 each
Show Snaffle
Black steel Show Snaffle Bit with German Silver trim and Copper inlaid jointed mouth with 8-1/2" cheeks.

#764
 each
Show Snaffle Bit
Brown steel Show Snaffle Bit with silver trim, 8" cheek and jointed mouth.

#1005
 each
Show Snaffle Bit
Stainless steel Show Snaffle Bit with 5" jointed copper mouth and 6-1/2" cheeks.

#989
 each
Show Snaffle Bit
Black steel Show Snaffle Bit with German Silver trim, high port black steel and copper mouth with brass roller and 8-1/2" cheeks with brass dot design.

#984
 each
Silver Show Cathedral Bit
Black steel Silver Show Cathedral Bit has silver engraved trim on shanks with 5" mouth and 8" cheeks.

#10701
 
Silver Show Flat A Bit
Silver Show Flat A Bit with an S design that gives excellent leverage. Black steel 5" mouth with copper inlays, silver trim on shanks and 8" cheeks.

#10708
 
Silver Show Flat C Bit
Black steel Silver Show Flat C Bit has a 5" mouth with copper inlays, silver trim on shanks and 8" cheeks.

#10710
 
Silver Show Open A Bit
Black Steel Silver Show Open A Bit has a 5" mouth with copper inlays, silver trim on shanks and 8" cheeks.

#10705
 
Silver Show Open C Bit
Black steel Silver Show Open C Bit has a 5" mouth with copper inlays, silver trim on shanks and 8" cheeks.

#10707
 
Silver Show Tongue Release Bit
Black steel Silver Show Tongue Release Bit has silver engraved trim on the shanks, 5" mouth and 8" cheeks.

#10703
 
Sliding Twisted Gag

Sliding Twisted Gag Bit with black steel twisted wire gag 5" jointed mouth on stainless steel slides.

#1320
 
Tom Thumb Roller Bit
Stainless Steel Tom Thumb Roller Bit has a double jointed 5" mouth with copper roller and 6-3/4" cheeks.

#1240
 each
Tom Thumb Snaffle Bit
Stainless steel Tom Thumb Snaffle Bit with jointed mouth and 6" cheeks. Available in size 4-1/2", 4-3/4" or 5".

#10457
 
Training Cathedral Bit
Black steel Training Cathedral Bit has a 5" mouth with slobber bar and 8" cheeks.

#10700
 
Training Flat A Bit
Black steel Training Flat A Bit has a 5" mouth with slobber bar and 8" cheeks.

#10709
 
Training Flat C Bit
Black steel Training Flat C Bit has a 5" mouth with slobber bar and 8" cheeks.

#10711
 
Training Open A Bit
Black steel Training Open A Bit with 5" mouth, slobber bar and 8" cheeks.

#10704
 
Training Open C Bit
Black steel Training Open C Bit has 5" mouth with slobber bar and 8" cheeks.

#10706
 
Training Snaffle Bit
Stainless steel Training Snaffle Bit with slobber bar, 5" jointed copper mouth and 7" cheeks.

#990
 each
Training Snaffle Bit
Stainless steel Training Snaffle Bit with 5" jointed copper mouth and 9" cheeks.

#987
 each
Training Snaffle Bit
Stainless Steel Training Snaffle with 5" black steel copper inlaid arched mouth with 7" cheeks.

#11054
 each
Training Snaffle Bit
Stainless steel Training Snaffle Bit with 8" cheeks has a 5" copper covered mouth.

#995
 each
Training Snaffle Bit
Stainless steel Training Snaffle Bit has a jointed mouth and 6-1/2" cheeks. Available in size 4-3/4", 5", 5-1/2", 6" or 6-1/2".

#10456
 stainless steel
#772 chrome plated 5"
Training Snaffle Bit
Black steel Training Snaffle Bit with 8" cheeks and a 5" jointed copper wire wrapped mouth.

#1062
 each
Training Snaffle Bit
Stainless steel Training Snaffle Bit with 5" jointed mouth and 6-3/4" cheeks.

#10458
 each
Training Snaffle Bit
Stainless steel Training Snaffle Bit with jointed 5" mouth and 9" cheeks.

#988
 each
Training Tongue Release Bit
Black steel Training Tongue Release Bit has a 5" mouth with slobber bar and 8" cheeks.

#10702
 
Western Snaffle Bit
Western Snaffle Bit with Sweet Iron jointed mouth and slobber bar. Made from colored aluminum in red, royal, green, purple or yellow.

#1635
 each
Wind Sucking Curb Bit
Stainless steel Wind Sucking Curb Bit with 5" brass mouth and 8" cheeks.

#25586
 each